• Remote control by mobile interface using WiFi(android) + Button control

       Interface : RPM controls of machine speed and brush rotation / Timer for automatic         

       operation / Battery level indicator / Sensor check

​

• Equipped with 2 sensors

       Sensor : automatic start/stop and auto-reverse / IP65

​

• Li-ion battery charging system using solar energy

       Independent solar panel(s) : 24V, a single panel or 24V x 2 ~ 3 panels

​

• Concealed wiring and simplified piping system

       Concealed design to protect sensitive electrical wiring from water, debris, dust and   

       other external contaminants

​

• A variety design of machine with great customization

       Lift & Shift design / Fixed installation / Modular design / RC based design / Length

       adjustable design / Mid to Large sized design

​

• Durability / Solidity / Weatherability

       Aluminum precision parts / Sophisticated assembly / Durable urethan & aluminum

       driving wheels / water and dust resistant design

       Designed to have 10 ~ 15 years of life-expectancy along with the proper maintenance

​

• Adaptability to site conditions

       Adjustments of all driving wheels position / Adjustments of main brush position /

       Modular / Length adjustment

Compared to manual cleaning work, the work speed is 10 ~ 15 times faster and the water consumption in wet cleaning is less than 1/10. The soft nylon brush  with the proper numbers moves smoothly sideways at < 0.4m /sec. while rotating 10 ~ 15 times/sec. to clean the solar panels (2022/01).

​

Solmaks is guided by upper(fixing) and lower(moving) wheels for holding the solar panels from above and below. Since its main driving wheels are repoistioning, It can be located on the right positon of solar panels.

Modular type of Somaks M can be assembled or disassembled, and Solmaks P has length adjustment capability so as to be installed and used on various size of solar arrays.

​

Solmaks can be driven safely by effectively using the edge of the side of the solar panels (Independent rails to be required for sizable Solmaks) .

​

Solmaks is equipped with its own independent covers to protect major components.

It covers the main body, mechanical parts, control, battery, and is made of aluminum unpainted.

​

Solmaks is equipped with water nozzles and a watter inlet to supply and spray water onto the surface of the solar panel.

​

Solmaks can be installed easily on the solar panels. Solmaks installed can have  the left and right movement being laid between the upper and lower ends of the solar panels.

The entire surface of the solar panel can be cleaned evenly.